Precise Measure Engineering alignment and vibration monitoring products

Laser Shaft Alignment Tools for Industrial Machinery

All-in-OneSolutions
TrustedBrands
ReliablePerformance

Align it right once. Stop replacing bearings and seals.

Misaligned shafts are one of the most common reasons pumps, motors and fans fail early. Our ROTALIGN laser shaft alignment tools give your team accurate readings in minutes, clear on-screen guidance for every correction, and a report you can file the same day.

What Is a Laser Shaft Alignment Tool?

A laser shaft alignment tool measures how well two connected shafts line up, for example a motor driving a pump. It uses a laser and a precision sensor mounted on each shaft to find any offset or angle between them.

The tool then tells you exactly how much to move the machine feet, up or down and side to side, to bring the shafts back into line. It replaces dial indicators and straightedges with faster, more repeatable readings.

How Does a Laser Shaft Alignment Tool Work?

  1. Mount the brackets. A laser unit and a sensor clamp onto the shafts on either side of the coupling.
  2. Enter the machine dimensions. You key in the distances between the sensor, the coupling and the machine feet.
  3. Rotate the shafts. As the shafts turn, the laser beam moves across the sensor’s detectors. The system reads that movement at each angle.
  4. Read the results. The display shows offset and angular misalignment, both vertical and horizontal, against the tolerance for your machine speed.
  5. Make the corrections. Live move mode shows the feet positions in real time as you add shims or shift the machine, so you know when you’re within tolerance.
  6. Save the report. The before and after readings are saved and can be shared through ARC 4.0 software.

Key Features

  • Single-laser, dual-detector sensing for accurate readings with fast setup
  • Live move mode to watch corrections happen on screen as you shim and shift
  • Soft foot diagnosis to find and fix a rocking foot before you align
  • Rugged IP65 tablets with Wi-Fi, Bluetooth and RFID connectivity
  • ARC 4.0 software for cloud sharing, records and custom reports
  • Multi-machine trains on the ROTALIGN Elite, up to 14 machines in one setup
  • Built-in ROI calculator to show the savings from each alignment job

Benefits of Laser Shaft Alignment Tools

  • Longer bearing and seal life: less load on bearings, seals and couplings means fewer failures.
  • Lower vibration: well-aligned machines run smoother and quieter.
  • Less energy waste: misalignment adds friction and drag that the motor has to overcome.
  • Less downtime: fewer breakdowns and faster alignment jobs during planned stops.
  • Repeatable results: every technician gets the same reading, not a judgment call.
  • Records you can trust: saved reports show what was done and when, for audits and trend tracking.

Applications

Laser shaft alignment tools are used on almost any rotating machine joined by a coupling:

  • Pumps and motors
  • Fans and blowers
  • Compressors
  • Gearboxes
  • Turbines and generators
  • Cardan (universal joint) shafts
  • Belt and pulley drives (with PULLALIGN)

Common industries include oil and gas, petrochemical, power plants, marine, pharmaceuticals, manufacturing and building facilities.

How to Use a Laser Shaft Alignment Tool

  1. Lock out the machine. Isolate the power and follow your site’s safety procedure.
  2. Check the basics. Clean the base, check for loose bolts and pipe strain, and test for soft foot.
  3. Fit the laser and sensor. Mount them firmly on each shaft with the brackets.
  4. Enter the dimensions. Measure and key in the distances the tool asks for.
  5. Take the measurement. Rotate the shafts through the required angle.
  6. Correct vertically, then horizontally. Add or remove shims first, then shift the machine sideways, using live move mode.
  7. Re-measure and save. Confirm the result is within tolerance, tighten the bolts and save the report.

Laser Alignment Tool vs Traditional Alignment Methods

Straightedge and feeler gauge
Dial indicators
Laser shaft alignment tool
Time per job
Fast to set up but needs repeat checks
Slow; manual readings and calculations
Fast; results and corrections on screen
Accuracy
Low; depends on the eye
Good, with a skilled user
High, down to micron-level sensor resolution
Skill needed
Basic
High
Moderate; the tool guides each step
Bracket sag
Not applicable
Must be measured and corrected
No mechanical sag from the laser beam
Correction guidance
None
Manual calculation
Live move shows feet positions in real time
Reports
None
Handwritten
Saved digitally and shareable

Dial indicators still work in skilled hands. But a laser tool cuts the time per job and removes much of the human error, especially on long spans and large machines.

How to Choose the Right Shaft Alignment Tool

The right tool depends on the types of machines you align and how frequently you perform alignment work. Consider the following questions:

  • What machines do you have? Standard motor-pump sets suit an entry-level system. Long machine trains, cardan shafts or large turbines need an advanced one.
  • How far apart are the shafts? Long spans need a longer laser range and an adjustable laser.
  • Where will you use it? Hazardous areas need ATEX-certified equipment.
  • Who will use it? Clear on-screen guidance helps newer technicians get it right.
  • How do you keep records? Look for software that saves, shares and reports results.
  • Will your needs grow? Field-upgradable systems let you add features later instead of buying again.

Technical Specifications

Specification
ROTALIGN Core
ROTALIGN Elite
ROTALIGN Elite EX
Level
Entry level
Advanced / expert
Hazardous areas
Measuring principle
Single laser, dual detector
Single laser, dual detector
Single laser, dual detector
Laser
Non-adjustable, fast setup
Adjustable, up to 10 m shaft separation
[Confirm]
Sensor
[Confirm]
6-axis, 1 µm resolution
High-precision, freeze-frame measurement
Display
IP65 rugged tablet
8” Gorilla Glass tablet, IP65
EX tablet or Fluke Alignment App (Android)
Battery
Long battery life [Confirm hours]
Tablet 11 h, sensor 55 h, laser 90 h
[Confirm]
Connectivity
Wi-Fi, Bluetooth, RFID, cloud
Cloud sharing via ARC 4.0
[Confirm]
Machine trains
[Confirm]
Up to 14 machines, multi-coupling
[Confirm]
Extra features
Live move, ROI calculator, field-upgradable
Live move, pass mode, move simulator, soft foot, vibration check
IntelliSweep, IntelliPass, inclinometer, vibration check
Certification
–
–
ATEX Gas and Dust Class 1; North American Class 1 Div 1
Software
ARC 4.0
ARC 4.0
Starter to Expert bundles

Full datasheets available on request.

Why Choose Our Laser Alignment Equipment?

Choosing the right laser alignment equipment is about more than accuracy. It’s about making alignment tasks easier, reducing costly downtime and helping your team work more efficiently. Our solutions combine reliable performance with user-friendly technology, giving your team the confidence to achieve precise results every time.

Trusted PRÜFTECHNIK and Fluke Partner

We supply genuine ROTALIGN and PULLALIGN systems backed by the manufacturer, with local support in Singapore.

Demo on Your Own Machines

See the system work on your pumps and motors before you buy, so you choose the right model the first time.

Training That Sticks

Product-specific training at your site or ours, so your technicians are confident from day one.

Field Service When You Need It

Short on time or staff? Our certified technicians can carry out laser shaft and roll alignment services and provide a full report. We respond to service requests within 48 working hours across Singapore.

Improve Machine Reliability with Our Laser Shaft Alignment Tools

Reduce downtime, minimise equipment wear and achieve precise shaft alignment with our advanced laser shaft alignment tools. Get in touch with our team to find the right solution for your maintenance needs.

FAQs