Ultrasound Leak
Detection Services
in Singapore
Find the leaks you can’t hear. Fix the ones that cost you most.
Every compressed air and gas system has leaks. The real question is how much you are losing, and where. Our ultrasound leak detection surveys find leaks across your plant while production keeps running. We then tell you which ones to fix first.
Why Leaks Deserve Your Attention
A leak the size of a pinhead does not look like much. But it runs 24 hours a day, every day, and your compressor works harder to make up for it.
The US Department of Energy says plants without a regular leak programme typically lose 20 to 30 per cent of their compressed air output to leaks. That is electricity you pay for and never use.
Leaks also cause other problems:
- Pressure drops that make air tools and machines run poorly
- Compressors that run longer, wear out sooner and need more servicing
- Extra compressor capacity bought to cover losses that could have been fixed
- Safety and product risks when the leak is in a gas, steam or vacuum line
For a plant that runs round the clock, finding and fixing leaks early is one of the easiest ways to cut energy waste.
How Ultrasound Leak Detection Works
When gas escapes through a crack, loose fitting or worn seal, it rushes from high pressure to low pressure. This creates turbulence, and turbulence makes sound. Most of that sound is ultrasonic, which is too high for the human ear to hear.
Our detectors listen at this high pitch, usually around 38 to 40 kHz. They turn the ultrasound into a sound the technician can hear through headphones, and show its strength in decibels on screen. A stronger signal generally indicates that the detector is closer to the leak
Ultrasound is directional and can be used to trace leaks even on a busy, noisy shop floor. This is why we can find small leaks that ordinary plant noise would hide.
What We Find
- Compressed air leaks in headers, drops, hoses, quick couplers, FRLs, valves and pneumatic cylinders
- Industrial gas leaks in nitrogen, oxygen, argon, CO₂ and hydrogen lines
- Vacuum leaks in chambers, seals, gaskets and process equipment
- Steam leaks and failed steam traps that pass live steam into the condensate line
Our Ultrasound Leak Detection Survey Process
- Walk-through and planning. We review your system layout, operating pressure and compressor data, then agree on the areas to cover.
- Area scan. With the detector at high sensitivity, we sweep each zone from a distance to pick up any ultrasonic activity.
- Trace and pinpoint. We move toward the strongest signal, lower the sensitivity and fit a focusing probe to confirm the exact source.
- Tag and record. Every leak gets a numbered tag on site, a photo, its location, the decibel reading and an estimate of its flow and yearly cost.
- Report and repair priorities. You get a report that ranks leaks by cost and ease of repair, so your team knows what to fix first.
- Re-check (optional). After repairs, we re-survey to confirm the fixes and measure the savings.
What’s Included in Every Leak Detection Survey Report
You get a report your maintenance team can use straight away. It includes:
- A tagged, numbered list of every leak found
- Photos and locations, so each leak is easy to find
- Estimated air or gas loss and yearly cost per leak
- A repair priority list based on savings, not guesswork
- A summary of total potential savings for management
- Data you can import into your CMMS or maintenance planner
Ultrasound Leak Detection vs Older Methods
With ultrasound, there’s no need to stop production, depressurize lines or touch the equipment. We can survey overhead pipework from the floor and cover large areas in a single shift.
Common Causes of Industrial Air and Gas Leaks
- Thread sealant and fittings loosening over time from vibration
- Worn hoses, couplers and push-in connectors
- Corrosion thinning older pipework
- Over-tightened or misaligned valves and couplings during installation
- Damage from forklifts, carts and maintenance work
- Failed seals and gaskets on cylinders, FRLs and drains
Industries That Benefit from Ultrasonic Leak Detection Services
Manufacturing and assembly
Compressed air leak surveys are the most common use of ultrasound, and hoses, fittings and couplers are where most leaks are found.
Power generation
Ultrasound is a standard way to test steam traps and to find air leaking into condenser vacuum systems.
Oil, Gas and Chemicals
Ultrasound is widely used to find gas leaks at valves, flanges and fittings, and it works without touching the line
Textiles, plastics and packaging
These sites use a lot of compressed air, so leaks are costly and pressure drops affect the machines
Why Choose Precise Measure Engineering
Finding a leak is the easy part. Knowing which ones matter, and having a team you can trust on a live plant floor, is what makes a survey pay off.
15+ Years in Plant Reliability
For over 15 years we’ve helped industrial teams in Singapore catch faults early. 500+ machines serviced and 100+ industrial clients trust us to get it right.
Certified, Site-Ready Technicians
Our technicians hold ISO CAT I–IV certification, and we’re bizSAFE Level 2. They’re also WSH-trained for process plants and shipyards, so they can work safely on live, pressurized systems.
Proven Ultrasound Technology
We use professional ultrasound detectors and acoustic imaging cameras from trusted brands such as UE Systems and Fluke to conduct surveys, providing faster scans, clear readings and visual identification of leaks on screen
One Partner, Start to Finish
We can run the survey, supply the instruments and train your team to do it in-house. We respond within 48 working hours across Singapore.
Ready to Stop Paying for Air You Don't Use?
Most plants recover the cost of a survey quickly once the biggest leaks are fixed. Tell us about your site and we'll suggest the right survey scope.
Frequently Asked Questions
-
Ultrasound leak detection is a way of finding leaks by listening for the high-frequency sound that escaping gas makes. A detector picks up that sound, converts it into something a technician can hear and shows its strength on screen, so the leak can be traced to its exact spot.
-
It finds leaks in compressed air, nitrogen, oxygen, argon, CO₂, hydrogen and other pressurised gases. It also finds vacuum leaks, steam leaks and failed steam traps.
-
No. We survey while your systems are running and pressurized. In fact, the system needs to be under pressure for leaks to make sound.
-
It depends on the size of your plant and pipe network. A small facility can often be done in a day; large sites may take several days. We’ll give you a time estimate after the initial walk-through.
-
Yes. Ultrasound is short-range and directional, so normal machine noise rarely gets in the way. In very loud spots, we use focusing probes, shielding and frequency tuning to isolate the leak.
-
Most plants benefit from a survey every 6 to 12 months. New leaks keep appearing as fittings vibrate loose and hoses wear out, so regular checks keep losses low.